Histórico da Página

Simples - Santa Catarina

This routine enables the calculation of the tax collectible from micro and small-sized businesses in the State of Santa Catarina which opted for the Simples System.

To use the Simples/SC benefits, the micro and small-sized business must obtain their previous framing based on the annual gross income in the following manner:

• Equal or lower than BRL 160,000.00 (one hundred and sixty thousand reais) is considered micro business;
• Higher than BRL 160,000.00 (one hundred and sixty thousand reais) and equal to or lower than BRL 2,000,000.00 (two million reais) is considered a small business.

The micro and small businesses are monthly subject to the collection, by the ICMS, of the equivalent amount:

It is considered a Taxable Revenue with the value corresponding to:

• goods sales and services rendering not involved in the Cities tax competence;
• non-operational incomes, excluding from them the financial incomes of interests, indexation, and discounts;
• revenue made by all sites of the same company, inside or outside the State of Santa Catarina;
• Own revenues, and revenues made by trading funds or commercial/industrial sites acquired by the company when it is exploiting under the same corporate name or another one;
• Sales of assets acquired for integrating the fixed assets, except when they occur after the regular use, considering a period not less than 12 months.

According to the current legislation, the taxpayers fitting this system, when performing goods outflows or services rendering dedicated to taxpayers not fitting to the same system, must emphasize the ICMS relating to the operation for the purchaser to be credited of the value.

The ICMS detailed in the tax document must be registered in the Tax Debited column of the Outflow Records, but it must not be displayed in the ICMS calculation, since the calculation of the tax collectible must be performed based on the Taxable Revenue of the period, as previously described.

Therefore, a new process was developed to calculate the ICMS for companies choosing the Simples/SC performing operations for both types of companies.

Credit reversal - Pernambuco according to Section 34, III, of Decree No. 14.876/91 - State of Pernambuco

By the ICMS Calculation, it is possible to calculate ICMS credit reversal based on inflow operations.

The following paragraph has been copied from the Section abovementioned.

The use of reduced rate imports a ban on the use of the full tax credit for the purchase of the goods. Thus, in relation to the outflows contemplated with a reduced rate, the taxpayer must reverse the portion of the tax credit proportional to the reduction.

When, at the domestic outflow, the rate of 7% is levied, the portion of the usable tax credit shall correspond to the following percentage:

X = 41.18%

Therefore, the percentage corresponding to 58.82% (100% - 41.18%) should be reversed.

When, at the domestic outflow, the rate of 12% is levied, the portion of the usable tax credit shall correspond to the following percentage:

 X = 70.58%

Therefore, the percentage corresponding to 29.42% (100% - 70.58%) should be reversed.

Copy the P9AUTOTEXT.PE file to the directory corresponding to \SYSTEM.

1. In the TIO File (Types of Inflow/Outflow), enter the percentage to be reversed in a said item with the levy of ICMS in the Rev % field(F4_ESTCRED). The credit reversal is only calculated if a percentage is entered in this field.
2. In the following fields, the system updates the credit reversal value when purchasing a particular good.

• Rev. Vl. (F3_ESTCRED)
• Rev. Vl. (F1_ESTCRED)
• Rev. Vl. (D1_ESTCRED)
• Rev. Vl. (FT_ESTCRED)

3. In the ICMS calculation, after the routine is processed, see, in the Additional Information tab Row 031, the total amount of the credit reversal. To display this credit value in Credit Reversal in the ICMS-Calculation tab, use the auto-filling available in the file P9AUTOTEXT.PE.

4.This configuration automatically posts the calculated value in the following way:

003.01 - REV. REF SECT. 34, III, OF DECREE No. 14,876/91.

Calculation of Credit Reversal for ICMS - Federal District according to subsection V of section 60 of Decree 18,955 RICMS-DF

1. In ICMS Calculation, complete the routine parameters and confirm.
2. In the ICMS Calculation tab, the value of credit reversal is displayed, calculated as follows:

(Value of unitary calculation base of the incoming invoice * inflow rate) * (quantity of outgoing invoice/100) * reduction percentage of outflow ICMS base.

Example of calculation:

• An incoming invoice with calculation base equal to BRL 12,500.00, a rate equal to 7%, and a product quantity of 250.
• Outgoing invoice, with reduction of 16.67, a quantity equal to 10.

((12500/250) * 0.07) * (10/100) * 16.67 = 5.834 – The system does not round it

The value of the credit reversal is 5.834.

Reversal of debits in the provision of Transport Services - Minas Gerais according to RICMS - MG Decree 43,080 of 2002, Annex XV Section 4.

Copy the P9AUTOTEXT.MG file to the corresponding \SYSTEM\ directory (if version 8.11 and 10). The file is used only for taxpayers in the state of MG.

Incentive Credit - Manaus

Based on the inflow and outflow operations with goods encouraged in the State of Amazonas, the system enables the Manaus Incentive Credit calculation.

Finished goods, when destined for civil construction companies or similar works, as well as operations with electronic equipment destined for production, are examples of products/operations that give the right to the Incentive Credit.

The industries with the right to the Incentive Credit apply the reimbursable credit amounts in their ICMS calculation, thus checking the final balance of the period.

1. Inthe Products File, assign the corresponding NCM code. The calculation of the Incentive Credit is carried out for the products that have the percentage informed. In the field, indicate if the percentage used in the Outflow is the one reported in the product record or the NCM x Customer Type binding in the MV_CRDM001
2. Inthe Customers File, enter the framework in the Incentive Credit: 1 = Not Encouraged; 2 = Construction Company; 3 = Others;
3. The calculation of the incentive credit is made only to those registered for transactions with Constructing Company (2) or Others (3).
4. In the TIO File routine, assign whether or not to calculate the incentive credit by entering in the field the form of calculation: 1 = Do Not Calculate;2 = Electronic Equipment; 3 = Construction.
5. The Incentive Credit calculation is only performed in the Inflow and Outflow Types registered for transactions with Electronic Equipment (2) or Construction (3).
6. Inthe Inflow/Outflow Transactions: Type the inflow and outflow operations using the products and TIO registered, as described in topics 3 and 4.
7. In the ICMS Calculation: Fill in the respective questions, and, in the Generate Incentive Cred. question,enter Yes.
8. After processing the routine, the total amount of the Incentive Credit is displayed in the Additional Information tab, row 024. If you want to display the credit value in Other Credits of the Calculation-ICMS tab, use the self-filling provided by the file P9AUTOTEXT.AM.
9. This configuration automatically enters the value calculated as follows: 006.01 - Incentive Credit. If it is necessary to edit the description or the item placement, edit the file P9AUTOTEXT.AM.
10. In the ICMS Calculation Record P9:Fill in the respective questions, and, in the Print Incentive Credit question, enter Yes.
11. After processing the routine, the information related to the Incentive Credit is displayed in the Tax Calculation Summary, Additional Information Chart, separated by Reimbursable Percentage and Amount, according to the current legislation requirements.

Statute no. 4533 - 2005 - Rio de Janeiro

This routine contemplates the State Statute No. 4.533 of April 4, 2005, which regulates the economic recovery policy of the cities of Rio de Janeiro, providing a special tax process to the companies.

The companies allowed a special process apply a specific tax rate on the monthly billing amount, deducing the amount obtained from the ICMS collectible of the period.

For Statute no. 4533 to be properly contemplated, it is necessary to perform the following procedures:

In the Configuration module, option Environment/Files/Parameters, observe the configuration of the following parameter:

For the ICMS calculation, only the Internal and Interstate Outgoing Invoices are considered, not considering the Return Invoices and forwarding them to Processing.

In the ICMS Calculation: Fill in the respective questions and confirm the processing.

Use of ICMS Credit - Outgoing Operations for Taxpayer Replaced pursuant to Section 271 of RICMS - SP.

Section 271 - The reimbursement of the value of the withheld tax or the installment of the withheld tax, provided for in Section 269, subsection IV, does not prevent the use of the credit by the taxpayer, when admitted, of the tax levying on the outgoing operation promoted by the taxable person for substitution by entering it in the book ICMS Calculation Record, in the table Tax Credit - Other Credits, with the expression Credit related to the proper operation of the substitute (Statute no. 6,374/89, section 36, with amendment of Statute no. 9,359/96, section 2nd, I). 

• Paragraph 1 - In the event that the goods have been received from another replaced taxpayer, the value of the tax levying until the previous operation is calculated by applying the internal rate on the basis of calculation that would be attributed to the sender's own operation if it was subject to the common taxation system. 
• Paragraph 2 - The value of the credit referred to in the previous paragraph cannot be higher than that resulting from the application of the internal rate on the value of the basis of calculation of the withholding made by the taxable person by substitution. 
• Paragraph 3 - In the impossibility of identifying the incoming operation of the goods, the replaced taxpayer may consider the value of the credit corresponding to the most recent entries, sufficient to carry the amount involved. 

Credit granted - Sao Paulo according to Decree no. 56,018 of July 16, 2010, Decree no. 56,855 of March 18, 2011, and Decree no. 56,874 of March 23, 2011, of the State of Sao Paulo.

Credit is granted to sites or companies in the State of Sao Paulo according to the Legal Framework.

Preconditions

Before generating the credit granted:

1. The configuration file P9AUTOTEXT.SP must be within the \SYSTEM directory of Microsiga Protheus.
2. In the TIO File, assign the percentage of the Credit Granted (F4_CROUTSP) applied to the item of the invoice as ruled by the legislation.
3. The MV_CROUTSP parameter must be filled in with the four (4) first digits of the NCM code that includes Decree no. of July 16, 2010, and Decree no. 56,855 of March 18, 2011, separated by slash ( / ) so that the System displays the value of the credit granted automatically using the P9AUTOTEX.SP routine.

After these settings, generate the incoming and outgoing transactions so that the Credit Granted field is automatically fed according to the application of the configured percentage.

To generate the Granted Credit value:

1. In ICMS Calculation, fill out the questions of the routine.
2. After processing the routine, the Credit Granted amount is displayed and presented in the tab:

• ICMS Calculation, Row 006/Code 007.32 – Credit Granted – Section 31 of Annex III of the RICMS, and, in the Additional Information tab, row 045, the value of the credit granted.
• ICMS Calculation Row 006/Code 007.33– Credit Granted - Section 32 of Annex III of the RICMS, and, in the Additional Information tab, row 045, the value of the credit granted.
• ICMS Calculation Row 006/Code 007.34 – Credit Granted - Section 33 of Annex III of the RICMS, and, in the Additional Information tab, row 045, the value of the credit granted.
• ICMS Calculation Row 006/Code 007.35 – Credit Granted - Section 34 of Annex III of the RICMS, and, in the Additional Information tab, row 045, the value of the credit granted.

Partial ICMS Tax Anticipation, according to the legislation contemplated, refers to Decree no. 8,963 of February 11, 2004 – BA Ordinance SF 84 of April 29, 2004 – PE Decree no. 52,515 of 2007 – SP Decree No. 52,742 (DOE of February 23, 2008), Decree No. 19,714, (DOE of August 4, 2003) – MA

It performs the treatment to calculate the credit when referring to the Tax Anticipation of ICMS in the incoming operations with differential rate and margin of Solidario, aimed at all taxpayers who make purchases from other States and that have an operation rate of less than the internal rate, or the internal rate greater than 12% (adjusted ST-VAT).

Requirements: In the TIO records, enter if the operation refers to the Tax Anticipation of ICMS.

This document aims to assist the generation of Accumulated ICMS Credit related to export or other hypotheses according to Section 106 of RICMS/BA.

Setup Procedure

In the Configuration Tool (SIGACFG), access Module/Files/Parameters and note the configuration of the following parameters:

The completion of this parameter is essential for the correct operation of the process.

Usage Procedures

1. In Tax Records (SIGAFIS), access Updates/File/Types of Inflow and Outflow and fill in the Accum ICMS Cr (F4_CREDACU) and Accum. ICMS % (F4_PCREDAC) fields.
2. Miscellaneous/Calculations/ICMS Calculation (MATA953).
3. Complete the parameters according to the field help instructions.
4. Check, in the Additional Information folder, rows 35 (Accumulated Credit - Export) and 36 (Accumulated Credit - Other Hypothesis) that the values have been displayed correctly. 
5. In Tax Records (SIGAFIS), access Updates/File/Types of Inflow and Outflow and fill in the Accum ICMS Cr (F4_CREDACU) and Accum. ICMS % (F4_PCREDAC) fields.
6. Miscellaneous/Calculations/ICMS Calculation (MATA953).
7. Complete the parameters according to the field help instructions.
8. Check, in the Additional Information folder, rows 35 (Accumulated Credit - Export) and 36 (Accumulated Credit - Other Hypothesis), the values presented.
9. In the Accumulated Cred. - Export or Accumulated Cred. - Other Hypothesis folders, the values previously calculated and displayed in the Additional Information folder must be displayed.

    Important

• In the Additional Information folder, the amounts for Accumulated Credit will automatically be displayed.
• In the Accumulated Credit - Export folder, the amount for the accumulated credit must be manually entered. Therefore, the taxpayer is the one who will determine the value to be used. The taxpayer must also enter the amounts related to debts.
• In the Accumulated -Oth. Hypotheses folder, the amount related to the accumulated credit must be manually entered, so the taxpayer will determine the amount to be used. The taxpayer must also enter the amounts related to debts. "